User's Manual

G ETTING STARTED

Setting Up the Renaissance Receiver and Using NEO 2’s Wireless Capabilities

. . . . .

NEO

User Manual

• Set up the Renaissance Place settings if you want to use NEO 2 with

Accelerated Reader or MathFacts in a Flash.

• Install the Renaissance Responder client as described in the Accelerated

Math Software Manual if you want to use NEO 2 with Accelerated Math

RP.

Connecting the Renaissance Receiver to Your Computer

1. Make sure you have installed NEO Manager before connecting the

Renaissance Receiver. See page 13. This is important because the

Renaissance Wireless Server Utility is installed with NEO Manager.

2. The first time you connect the Receiver to your computer, make sure you

are logged in to your computer as an administrator or that you have

administrator privileges. This ensures that the device drivers load

properly.

3. Plug the square end of the data cable into the back of the Receiver

4. Connect the flat USB connector on the data cable to a matching USB port

on your computer