User's Manual

G ETTING STARTED
Printing Files from Your NEO
11
. . . . .
NEO
User Manual
Printing Files from Your NEO
You can print a NEO file from your computer after sending it (see page 10) or
retrieving it using NEO Manager (see page 52). You can also print directly
from your NEO. There are three ways to do this:
• You can connect your NEO to a printer with a USB cable and then press
print on the NEO as described below.
• You can use IR beaming to send the file from NEO to your printer as
described below. (For more about IR requirements, see page 207.)
• For NEO 2 only, you can use wireless printing. See the next page.
NEO doesn’t control print settings such as font, print quality, margins, and so
on. These settings are determined by the printer’s default settings.
Printing from NEO Using a USB Cable Connection
1. Plug one end of the printer’s USB cable into NEO’s USB printer port A.
2. Make sure the other end of the USB cable is plugged into the printer, and
make sure the printer is on.
3. Make sure NEO is turned on.
4. Open the NEO file that you want to print. (If you want to print a linked file
instead of the main file, press ctrl-L to open the linked file. For more
about linked files, see page 41.)
5. Press print on NEO to print the open file.
How to Send Text to a Printer Using IR Beaming
If your printer has an IR transceiver, you can print using IR beaming. Follow
these steps:
1. Make sure your NEO is turned on.
2. Open the NEO file that you want to print. (If you want to print a linked file
instead of the main file, press ctrl-L to open the linked file.)
For more about
printers’
compatibility with
NEO, go to
http://support.renlearn.com/
techkb/techkb/6833262e.asp.
A