User's Manual

230
NEO
User Manual
A BOUT NEO BATTERIES AND POWER SOURCES
Replacing AA Batteries
. . . . .
NEO remains on until the cable is disconnected or the AlphaHub or computer
is turned off. When the cable is disconnected or power is removed from the
cable, NEO returns to the state it was in before connecting. For example, if it
was off before connecting, it will turn off again when disconnected.
When connected to a computer or AlphaHub, NEO uses the power available
from the computer even if no batteries are installed. Don’t connect the AC
adapter when NEO is connected to a computer; it’s not necessary.
Replacing AA Batteries
When you replace NEO’s AA batteries, you must change all three batteries. If
one discharged AA battery is used with two new batteries, the battery life is
significantly reduced, even though two out of the three are new.
To replace batteries, remove the battery compartment cover, remove the old
batteries, and install the new batteries as described on page 3.
Using the Optional Rechargeable Battery Pack
If you purchased a rechargeable battery pack, your batteries are automatically
recharged whenever you connect the NEO to a computer or AlphaHub using a
USB cable. You can also recharge the batteries by plugging the NEO in using
the AC adapter. See page 4 to find out how to charge or recharge the battery
pack using the AC adapter.
Important: If you’re going to store your NEO for a month or longer, charge
it before you store it, and then again after you take it out of storage to
compensate for the batteries’ self-discharge.
Specifications for the AC Adapter
These are the specifications for the AC adapter that is included with the
rechargeable battery pack:
Class 2 transformer
Input: AC 120V 60Hz 9W (US) or 230V 50Hz 11.5W (UK and Europe)