User's Manual

226
NEO
User Manual
TROUBLESHOOTING
Reinstalling or Repairing Keys on the NEO Keyboard
. . . . .
4. Take the two joined pieces and place
the assembly into the keypad.
Look at the space where the scissors
piece fits. For most keys, the left side
has two little “slider” bars. The right side
has a narrow vertical channel.
For arrow keys, the top side has the two
little “slider” bars, and the bottom has a
narrow vertical channel.
5. For all keys except the arrow keys,
put the square part of the scissors
piece to the far left of the keypad area where it is to sit; then, slide it
underneath the two slider pieces. Slide it all the way to the right.
For arrow keys, put the square part of the scissors at the top of the
keypad area where it is to sit; then, slide it underneath the two slider
pieces. Slide it all the way to the bottom of the area.
6. Now you should be able to click the
right side (or the bottom side of
arrow keys) into the narrow channel
just by pressing down on that side.
You should hear it click into place. It
should look like the image to the
right.
7. Now, go to page 223 and follow the
steps for reinstalling the key cap.
Reinstalling the Spacebar
1. Fit the two wire ends into the tabs next to each scissors assembly as
shown.