User's Manual

190
NEO
User Manual
C HANGING SETTINGS FOR NEO AND SMARTA PPLETS
Using the NEO Manager Software to Change Settings
. . . . .
Beamer Settings
Beamer has these settings in NEO Manager:
KeyWords and KeyWords Wireless Settings
For information about the KeyWords settings in NEO Manager, see page 146.
Disable This SmartApplet Setting
Every SmartApplet includes the “Disable This SmartApplet” setting. You can
check this box to disable the SmartApplet for connected NEOs so it cannot be
used. (To find out how to disable SmartApplets right on the NEO, see
page 78.) For example, you might disable Calculator if you want to prevent
access to electronic calculations during a quiz or math assignment.
Setting What It Does
Disable this
SmartApplet
Prevents users from using the Beamer SmartApplet.
Permit Send Determines whether users are allowed to beam files
to another NEO.
Warn if Overwriting
Clipboard
When a NEO receives a beamed file, this setting
determines whether the NEO will warn the user if the
incoming file is about to overwrite what is currently
in the NEO’s clipboard.
Send to Palm Device
as AlphaWord
When a NEO beams a file to a Palm device (including
Danas), this setting determines the format of the sent
file. If this setting is on, the file will be sent as an
AlphaWord file. If it is off, the file will be sent in
Memo Pad format.
Require Master
Password
Determines whether the master password is required
to change Beamer settings on the NEO itself in the
Control Panel. This is helpful if you want to prevent
students from changing Beamer settings, especially if
you’ve decided to turn off the Permit Send setting.