User's Manual

184
NEO
User Manual
C HANGING SETTINGS FOR NEO AND SMARTA PPLETS
Using the NEO Manager Software to Change Settings
. . . . .
1. Start NEO Manager on your computer (see page 15) and connect your
NEO (see page 9) or the SmartOption Mobile Lab.
2. In NEO Manager, click the Settings tab.
3. Click System in the Settings List
A.
4. Check the settings you want to change
B. (You might need to scroll down
to view all the settings.) Then, make changes to the settings as needed.
Note: When you change settings, notice that NEO Manager automatically
checks the System box on the left
A. If you remove the check mark from
this box, changes you make to settings won’t be sent to your NEO.
5. Click the Send List tab and verify that the settings you want to send
appear in the Send List.
6. If you have a SmartOption Mobile Lab and you want to send the changes
to some, but not all, of the NEOs, click Select Devices. Check the
numbers that you want to send the changes to; then, click OK. (To send to
all connected NEOs, skip this step.)
7. Click Send. If you have set a send list password (see page 197), you
must enter the password and click OK.
A
B