User's Manual

138
NEO
User Manual
K EYW ORDS SMARTA PPLET
Sending All KeyWords Student Data from NEO 2 to NEO Manager
. . . . .
Sending All KeyWords Student Data from NEO 2 to NEO
Manager
When you use KeyWords Wireless on NEO 2 in online mode (see page 140),
data for each student’s KeyWords work is sent to NEO Manager after each
Accuracy and Speed test. Students can also send their KeyWords data to NEO
Manager at any time (see page 133).
At times, you may need to send all KeyWords data from a specific NEO 2 to
NEO Manager. This sends the data for all students who have used KeyWords
on that NEO to NEO Manager. When you do this, the data is not removed
from the NEO 2.
Follow these steps:
1. In KeyWords, use the arrow keys to select Teacher options and press
enter.
2. Type the master password and press enter.
3. Select Send Keywords student data to NEO Manager and press enter.
4. A message will remind you what this option does. To continue, leave Y
selected and press enter. (If you don’t want to continue, press N, then
enter, instead.)
5. You may be shown a list of Networks that are available. (Networks are
Renaissance Receivers connected to computers.) Use the up and down
arrow keys to highlight the Receiver you want to connect to; then, press
enter.
If you have chosen a Receiver before, the program may ask if you want to
stay connected. Press Y for yes or N for no; then, press enter. (If you
choose no, you’ll need to select another Receiver.)
6. NEO 2 will check settings, then send the data. When the NEO 2 has
finished sending the data to NEO Manager, it will notify you. Press the
space bar.