User's Manual

M ATHF ACTS IN A FLASH (OFFLINE) SMARTA PPLET
Taki n g Tes ts
107
. . . . .
NEO
User Manual
6. For each problem, press the arrow key for the answer that you want to
choose; then, press enter. For example, to choose the answer “10” in the
problem shown below, you would press
L on the NEO 2 because that is
the arrow shown below “10” on the screen.
If you choose the correct answer, a square will appear around the answer,
and then the next problem will appear.
If you choose the wrong answer, an X will appear over the answer you
chose; then, a dotted square will appear around the correct answer. When
the square disappears, choose the correct answer and press enter.
If time is almost up for a problem, a clock icon will flash in the black bar at
the top of the screen; choose an answer as soon as you can and press
enter. If time runs out before you answer the problem, the next problem
will appear.
7. After you answer the last question, the screen will show you how many
problems you answered correctly out of the total number you saw. It will
also show you which problems you answered incorrectly and their correct
answers. You can use the arrow keys to scroll through the results.
When you are done, press enter to go back to the Select a Level screen.
Taking Tests
Students follow these steps to take a test for a MathFacts in a Flash level.
Tests always include 40 problems.
1. Open the MathFacts in a Flash (offline) SmartApplet (see page 106).
2. Leave Practice/Test highlighted and press enter.
3. Use the arrow keys to highlight the type of math facts you want to take a
test for as shown below. Then, press enter.
If you have tested on
this level and the
test is still in the
history, the practice will
include any problems you
missed on the test plus
questions deemed
challenging for the level.