Troubleshooting guide

SECTION 3
OPERATING THE PRINTER
48
Network Config
Permits you to view, enter or change settings to connect the Printer to your network.
Network Connection Set Up:
This is a brief description of the processes. For more details see: “Connecting the Digital Color Printer via
Network (Ethernet Port)”
1. Connect the printer to the computer via USB.
NOTE: To initially access the Toolbox and
make the necessary Network settings; the printer
must be connected to the computer via the USB
cable (during driver install, the USB choice was
selected).
2. Open the Toolbox. On the “User Interface” page,
click Network Config.
3. The “Network Configuration” page opens. Your
IT person can choose the Network Settings box
to enter the correct settings for your network.
4. Connect Ethernet cable to Network Port on Rear Panel of Printer.
5. Re-install the M Series Driver, but this time choose the Network
choice during the installation process.