Troubleshooting guide

SECTION 3
OPERATING THE PRINTER
41
NOTE: If you set this value lower than -27 (2.7 mm) the image may not print at all.
Max Page Width – (Right Margin) lets you set a “right margin” (boundary) for the image you are
printing. Max value = + or – 2208 (220.8 mm, 8.69”)
Top Adjustment – No function
Bottom Adjustment – No function
• Watermark – Prints background text onto the media along with the original document. A few
selections (SAMPLE, Draft, COPY, Confidential) are provided with the driver.
First page only – When a watermark is selected; the “First page only” option is available.
Selecting this option prints the watermark on the first page, but not subsequent pages.
Un-checking this option prints the watermark on all pages.
Custom – This button lets you create a new watermark or edit an existing watermark, including
font selection, color, size and printing angle.
• My Print Settings – Allows you to save or recall (select) your custom driver settings for various
jobs.
Media Tab
The Media tab provides the following features:
• Position Adjustment – These features will
allow you to make small corrections to the
horizontal and vertical print positions.
Max value = + or - 500 pixels (0.62 in, 15.87
mm)
Horizontal Offset – a positive value will shift
the image to the left. A negative value will
shift the image to the right.
Note: Once you set a value greater than +94
pixels (3 mm), you may not see any
additional change to the print position. At
this point the image is at the very left edge of
the printer’s print area.
Vertical Offset – a negative value will shift
the image lower (down). A positive value
has no effect. Please contact your support
representative if you are not able to print at
the very leading edge of the media. A change
to the “tof_adjustment” value, in the Service
Manu (Printer Control Config), may be needed.
Inches – value is set/displayed in inches
Millimeters – value in set/displayed in millimeters (mm)
Pixels – value is set/displayed in pixels (very small)
• Top of form indicator –Please be sure “None” is selected or the printer will not operate properly.
The other choices are not valid for this printer model.
• Page Cutting – (Do NOT select) Please be sure neither of these boxes are selected, or the printer
may not operate properly. These choices are not valid for this printer model.
• My Print Settings – Allows you to save your custom driver settings, for a particular print job, so
they can be easily recalled (selected), in the future.