Troubleshooting guide

SECTION 2

INSTALLING THE PRINTER

5. When the Printer Connections window opens.

Select the USB choice and then click Next>.

NOTE: If you plan to connect the printer to a

Network; first you need to install via USB.

After this process is complete; please refer to

the section title “Connecting the Digital Color

Printer via Network (Ethernet Port)”.

NOTE: If you receive a Windows security or

authorization warning, click on “YES” or

“Continue Anyway”.

6. After a few moments the “Connect your device

now” window will appear.

Turn the printer’s Main Power Switch ON; then

press the control panel’s ON/OFF button. Wait

about 45 seconds for the Print Engine to power-

up (ON/OFF button will illuminate). Then

connect the USB cable.

Don’t

click on the <Back or Cancel buttons. The

software will automatically begin installing, once

it recognizes that the printer has been connected.

7. You may receive two Windows security warnings during the software installation process. One for

the “USBCOMM Device Driver” and one for “Printers”. Be sure to click on Continue Anyway.

8. The necessary files will be copied to your

computer system.