User guide

78 Label Studio User’s Guide
Available reports
Job Summary The Job Summary reports lists the settings of your job file that affect label
printing.
Print Log The Print Log shows what units were formed and why. The Print Log also shows
any breaks that you make during printing. It lists starting and ending record
numbers and the total number of records in each unit.
The Print Log is especially useful if you split your Label Studio output.
Inkjet Format
Summary
The Inkjet Format Summary gives the bindery line operator pertinent information
about the inkjet setup. This report is printer specific, and only shows information
that relates to your printer. The Inkjet Format Summary is available for inkjet
drivers only.
Inkjet Simulation The Inkjet Simulation lets you view and verify your label design, even if your
inkjet printer is not ready. By printing this report, you can make sure that you
have set up your address and message information correctly. The Inkjet
Simulation is available for inkjet drivers only.
The Inkjet Simulation report shows the output as it appears in the data stream. If
the barcode was converted, the report shows the converted characters.