User guide

72
Label Studio User’s Guide
Preview labels
There are two ways to preview labels. You can either preview them through Label
Studio or through Label Toolbox.
Label Studio To view your labels before you print, choose Tools > Preview Labels. This will
only work if there is a design file assigned to the current job file and the required
blocks are completed.
Label Toolbox When you are in the Design window of Label Toolbox, you can preview your
labels as you design them by choosing View > Label Preview.
Toggle button In the preview mode, there is a Toggle Label/Page View button that
allows you to change between viewing a single label or an entire page
of labels.
Preview flow There are four radio buttons at the bottom of the Label preview window that
allow you to adjust the viewing order of your labels (East/West, North/South,
North/South Page or North/South stacked). The default option is based on the
print direction setting from the Label Options window within the Output Setup
block in Label Studio.
To activate the preview flow buttons, you must choose page view with the toggle
button.
Test and Banner pages: The preview does not include any test or
banner pages that you may have.
Tip: By resizing the print preview window and the design window, it is
possible to have both on your screen at the same time. This feature
allows you to see the changes you make to your labels instantly.