User guide

60 Label Studio User’s Guide
Blank line
suppression
You can delete blank lines from your final
printed label by choosing either Up or Down
from the Suppress Blank Lines drop-down list
in the Frame properties window (Miscellany
tab).
 Choosing Up moves the objects up with
blank lines below.
 Choosing Down moves the objects down with blank lives above.
To exclude a non-line based object from being affected by blank line suppression:
1. Select the object on your design.
2. Choose Format > Position.
3. Select the Anchored option, and click OK.
How to indent objects Use frames to indent objects on your layout. For example, suppose you want to
indent a field 1 inch (or indent to column 6 for inkjet printers). To do this:
1. Choose View > Rulers from the menu, if necessary.
2. From Miscellany in the Object window, drag a Frame object and drop it onto
your layout. Watch the red line on the ruler to determine the exact position of
the frame.
3. While the Frame is selected, choose Format > Position from the menu and
enter the exact position requirements, if necessary. Click OK.
4. Drag the object into your frame. You may need to resize your frame to view
the entire object.
Heidelberg drivers Frames can be used with a Heidelberg driver to specify a line’s indent and length.
To do so, you need to make sure that each frame’s Text Flow option is set to Skip.
While the frame is selected, choose Format > Position to set the Text Flow option.
You can also set an indent or length setting manually with the following line-level
settings:
 LineIndentOverride
 LineLengthOverride
Access these settings from the Line Properties window in Label Toolbox. Enter
an integer from 0 to 999 depending on what you want.