Specifications

Appendix
\text\da590\appendix 9.20 DA590 Instruction
Manual
The HP DeskJet 500 driver is called HPDSKJET.DRV. For details, re-read the process for
copying the Generic/Text Only driver above.
All HP printer drivers reset a printer to factory defaults before formatting and sending
information to the printer. We suggest that you send your top and left margins from your
software, when using the HP DeskJet 500 driver.
Using the Windows 3.1
®
HP DeskJet 500 Driver
To set up the HP DeskJet Printer Driver in Windows
®
3.1 to use with the RENA DA-590 and
print text instead of graphics, do the following:
Follow the Windows
®
instructions for adding a printer driver using the Control Panel in the
Main window.
After the installation, the HP DeskJet 500 on LPT1: or whichever port you set it for, will
appear in the Installed Printers window.
Then Click on the Setup button.
In the Cartridges (max: 2) window click on E: Tms Rmn 12 point and
T: Helv 8,10,12 & 14 pt.
Both E and T should be highlighted.
Click on the OK button.
Click on the Close button.
Close the Control Panel window.
Close the Main window.
Open your application.
When selecting the HP DeskJet 500 as the default printer in your application program, be sure
to select one of the internal fonts of the DA-590 as the default font. These fonts will be
available in the listing of fonts available in Windows
®
. These are not True Type fonts. They
will have a computer/printer icon next to the name of the font instead of the letters TT. The