Specifications

\text\da590\errormes 8.1 DA590 Instruction Manual
8. Error messages and solutions
Error message Cause Solution
Setting locked !!
Configuration is blocked. Select the option “Setting
locked:” “no” in programming
mode
No addresses !!
No addresses stored, hence
address cannot be repeated.
Transmit data to printer.
Too many characters !!
Address contains too many
characters, therefore it cannot
be repeated.
Restrict the address size to 1.5
Kbytes.
NO PAPER !!
Out of paper. Insert more forms (see Sec. 3).
PAPER JAM !!
REMOVE PAPER
Paper jam. Remove jammed paper, set up
paper feed again (see Sec. 3).
POSITION ERROR !!
CHECK TOP MARGIN
The first print line is outside
the paper format.
Reduce the “TOP MARGIN”
setting with the “ð” key or in
programming mode. (see
Sec. 5).
ADDRESS TOO LONG
CHECK TOP MARGIN
Address too long for the
paper or no form feed
detected
Reduce the “TOP MARGIN”
setting with the “ð” key or
make sure that the software is
sending a form feed. (see
Sec. 5).
NO INK !!
CHANGE PRINTHEAD
Print-head is empty. Replace the print-head (see Sec.
4) or use reset if the print head
still has ink in it.
PRINTHEAD ERROR !
VERIFY HEAD MOVEMENT
Error in print-head transport Switch printer off.
Check whether the head slide
has jammed.
Check the print-head fuses
(SI2)