Specifications

Printer functions
\text\da590\printer functions 5.13 DA590 Instruction Manual
A programming example
You want to change the set up from 6 lines per inch to 8 lines
per inch.
- Switch the printer on.
Programming mode - Press the “prog” key.
Activate required
menu field
- Use the “prev” or the “next” key to move to the “LINE
SPACING” menu choice. “LINE SPACING” is blinking.
Changing from menu
field to option field
- Press the “enter” key. The option field on the right with a
“6” is blinking.
Activate required
option field
- Use the “next” key to change the blinking “6” to “8”.
End programming
mode
- Press the “end” key. The changed value is now stored in
the settings under the selected "Setting No" and the printer
is in off-line mode again.
Initializing the printer
without loss of setting
set-up
To reset to the factory default settings, select option “No 0” in
the “SETTING” menu field in programming mode. You can
end programming mode by pressing the “enter” key. The
“Set 0U” message appears in the display. The other settings
remain stored under their respective setting numbers.
with loss of setting set-
up
To return all the changed values and settings to factory default
settings, switch the printer off and ....
- Keep the “prog” key pressed while switching the printer
on again.
The following
display appears
DA 590 Inkjet
Default Reset
The printer now has the default settings and all set-ups are as set
at the factory. The display shows “Set 1U”.