Specifications

Printer functions
\text\da590\printer functions 5.10 DA590 Instruction Manual
EMULATION The DA-590 printer can be operated with software programs that were
created for other RENA printers. To do so, the relevant printer must be
selected in the menu option "Emulation".
Κ Not all control instructions of the other printers are
recognized, such as graphics instructions !
SETTING
LOCKED
You may “lock” each setting individually. This means that the
corresponding set-up cannot be changed via software escape
sequences.
If you select the “yes” option, your setting is locked.
The status of the active setting is shown on the display.
The display text “Set1U” means that Setting “No 1” was selected, but is
Unlocked.
The display text “Set1L” means that Setting “No 1” was selected, but is
Locked.
SERVICE
Prom Displays the internal software version (EPROM numbers)
Adrc Displays the number of printed addresses from initial operation of the
printer.
The counter can be only be reset by service personnel.