Specifications

Printer functions
\text\da590\printer functions 5.9 DA590 Instruction Manual
HEX TO ASCII HEX TO ASCII conversion off/on
If conversion is switched on, the printer interprets the
per-cent symbol “%” as a non-printable control character.
The two characters following the “%” symbol are interpreted
as Hexadecimal values and combined into a single character.
Example: %0C = 0C = Form Feed
LINE MODE Line mode off / 1 - 99 lines
This creates a form feed after a specific number of line feeds.
If the “prev” or “next” key is pressed and held down, the change
takes place in 10 line steps, otherwise in 1 line steps.
DELIMITER <> With Delimiter “on”, surrounding an address with these two symbols
“<“ (less than) at the beginning of the address and “>“ (greater than)
after the ZIP code, will force a form feed.
CARRIAGE
CORR.
This allows for aligning multiple lines when creating graphics with bi-
directional printing.
Select one of the following eleven values :
+5, +4, +3, +2, +1, 0, -1, -2, -3, -4, -5
Κ This feature is only recognized when selecting “bid” in the Print Mode
menu. It allows you to set your printer so that you can print graphics
"bi-directionally" with the same quality as "uni-directionally", but with
a greater throughput than when using uni. or aut. !