Specifications

Printer functions
\text\da590\printer functions 5.6 DA590 Instruction Manual
LEFT MARG. This allows you to define the spacing between the edge of the print
area and the first printed character. The range is 0-150 mm.
By pressing and holding down the “prev” or the “next” key, the margin
change is performed in cm-steps (1 cm = 10 mm), instead
of in mm-steps.
TOP MARGIN This allows you to define the spacing between the leading edge of the
material and the first printed line. The range is 0-400 mm.
By pressing and holding down the “prev” or the “next” key, the margin
change is performed in cm-steps (1 cm = 10 mm), instead
of in mm-steps.
ORIENTATION Rotating the address block by 180°.
In “Nor”, the first line is printed first.
In “Rev”, the last line is printed first.
CHARACTER
SET
National character sets with their own special characters in each
language (see character sets in the Appendix).
BIT8 SET TO This menu allows you to define how the DA-590 is to execute bit 8.
This menu prompt is active only for 7-bit character sets.
The following variants are possible:
BIT8: the higher-value bit (bit 8) of the received character is taken over
in unchanged form.
FIX0: the higher-value bit (bit 8) of the received character is always
deleted.
FIX1: the higher-value bit (bit 8) of the received character is always set
to "1".
BARCODE
Use this menu to change between the USPS ZIP barcode, bpo4