Specifications

Printing
\text\da590\printing 4.3 DA590 Instruction Manual
Cleaning the print
head nozzles
The print head nozzles are cleaned automatically
- before each test print.
- after switching from off-line to on-line.
- after approximately every 100 printed addresses.
- when no data is received after end of printing.
The print head nozzles should be cleaned manually if it has
not been used for several days.
- To do so, remove the print head from the printer (see
diagram above).
- Slide a piece of paper across the print head nozzles back
and forth several times. Or, use a damp cloth.
Κ-When the printer is not being used, the print head
must be removed and stored properly. This will
avoid nozzle clogging and the possibility of ink
leaking out and damaging the printer.
Print test
Press the “test” key. The bottom sheet is fed in and printed with a
test address. The sheet is then ejected and the next sheet is fed in.
Κ
Never touch the internal parts of the printer while it is running !