Specifications

printing
\text\da590\printing 3.8 DA590 Instruction Manual
Aligning the exit
rollers
Align the two exit rollers (12) so that the material is gripped evenly.
The printed area must not pass under the exit rollers.
Check the set-up by running several pieces through without printing.
Feeding without
printing
Press the “pap” key: a single piece should be fed in.
Press the “pap” key again and a single piece should be ejected and
the next single piece should be fed in.
Κ
Never touch the internal parts of the printer while it is running !