Specifications

printing
\text\da590\printing 3.7 DA590 Instruction Manual
Setting the vertical
elevation guide
adjustment
- Place two pieces of the material (3) on the elevation guide so
that they rest against the separators (b) and the guide block (4).
- Slide the guide block so that the bottom of the block just barely
touches the top edge of the top piece of material.
- Fan the material so that the bottom piece sticks out more than the top
piece.
- Adjusting the elevation guide angle:
The optimum angle of the elevation guide depends on the length of the
material.
shorter length = steeper angle
longer length = flatter angle
- Secure the elevation guide in-place with the knurled screw (a).