Specifications

printing
\text\da590\printing 3.4 DA590 Instruction Manual
Defining the print position
Before beginning to print, you must decide where you want to print
on the material. The printing area is indicated by arrows on the
decal on the housing above the print head. The printing area is 6.5”
(165 mm ) from the inside, where the print head housing meets the
body of the printer, out to where the operator stands.
Rotating the address block The optimal printing direction depends on the size of the piece and
where you want to print on it.
The address block, with its left margin, may be rotated by 180°.
“A/∀” key = “Nor” “A/∀” key = “Rev”