Specifications

Operating the printer
\text\da590\operation 2.5 DA590 Instruction Manual
“ð” key
The right “ð” arrow key adjusts the print start position toward the
leading edge of the media.
“ ” key
Press this key (backspace) once for each address to be reprinted
(maximum 10).
“ ” key
Pressing this key will rotate the printing direction by 180°.
“start”+ “pap” keys Pressing these two keys at the same time resets the address
counter to “0”.
“test” + “pap” keys Pressing these two keys at the same time resets the test address
counter to “0”
When are the keys active?
When the printer is first turned on, it is in off-line mode. Except for the “start” key, the keys
are active only in off-line mode.
On-line mode Press the “start” key. You are now in on-line mode.
The following display appears.
100% Cour12 000000
On LQ Set1U Nor
In this mode the printer is ready to print.
Repeatedly pressing the “start” key toggles the printer between
on-line and off-line mode.
Off-line mode In off-line mode, the following display appears and programming
mode can be entered by pressing the “prog” key.
100% Cour12 000000
Off LQ Set1U Nor