Instruction manual

Printer functions
\text\etd\DA608\printerf 5.15 DA608 instruction manual
Hardware Test Testing of various hardware components.
(For service personnel only!)
Head Reset Resets the ink counter afte
r a new cartridge has been inserted (see
page 4.1).
Application example in programming mode
You want to set up a configuration whose line spacing is changed from
6 lines/inch to 8 lines/inch.
– Switch the printer on.
Programming mode – Press the "PROG" key.
Activate required
menu field
–
Use the "PREV" or "NEXT" keys to move to the desired "Line
spacing" menu field. The blinking menu field is activated.
Changing from menu
field to option field
– Press the "ENTER" key. The option field (= 1 line to the right
)
blinks..
Activate required
option field
–
Use the "PREV" or "NEXT" keys to move to the desired option
field "8". The blinking option field is activated.
End programming
mode
–
Press the "END" key. The new value is now stored in the
configuration under the selected "Setting
No" and the printer is
in off-line mode again
or
–
Press the "START" key. The printer is now in online mode again
and is ready to continue the print job.
Initializing the printer (default reset)
without loss of
configuration
To get to the default configuration, select option "No 0" in the "Setting"
menu field in programming mode. To end programming mode, press
the "ENTER" key. The "Set 0U" messa
ge appears on the display. The
set configurations are stored under their respective setting numbers
(cf. "Setting" menu prompt).
with loss of
configuration
To return all the changed values and
configurations to their original
settings, switch the printer off.
– Keep the “PROG" key pressed down when switching the printer
on again.
The display shows
DA608 Inkjet
Default Reset
The printer now has the default settings and all configurations as set at
the works. The display shows "Set 1U”.