Instruction manual

Printer functions
\text\etd\DA608\printerf 5.10 DA608 instruction manual
Paper Speed
The transport speed of the paper can be reduced down to 30%. This
may be required for particularly delicate or heavy types of paper.
Eject Delay 0.1 – 9.9 seconds
The paper ejection can be delayed by a selectable time (up to 9.9
seconds), so that the newly printed ink can dry.
Paper Sensor End-of-form detection on/off.
When the end-of-form detection function is activated, the light barrier
is interrogated before every line is printed as to whether paper is
present in the print area.
For printing media with black surfaces, you can deactivate the paper
light barrier during printing. To do this, you must set a format size in
the “PAPER SIZE“ menu (see page 5.9) or measure it with the
key.
When the end-of-form detection is deactivated and a format size has
been specified, the light barrier is interrogated as to whether paper is
present in the print area only when the paper is fed in.
+
An incorrect form size can lead to printing outside the paper
area!
Separation Setting the distance between two successive sheets of paper.
Select one of the following values :
min. lev1 lev2 lev3 lev4 max.
Vert. Correct.
This allows a vertical offset between the print lines to be corrected.
The correction is performed in steps of
1
/
150
inch.
Select one of the following 11 values :
-5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5
Setting locked
You may "lock" each configuration individually. This means that the
corresponding configuration cannot
be changed via printer
instructions.
If you select the "yes" option, your configuration is locked and the
corresponding printer instructions are ignored. In the “SETD“ service
program, this setting is clearly identified by “!!!“ (see sample print-out
on page 5.13).
The status of the active configuration is shown on the display.
The display text "Set1U" means that configuration "No 1" was
selected, but is Unlocked.
The display text "Set1L" means that configuration "No 1" was selected,
but is Locked.