Instruction manual

Printer functions
\text\etd\DA608\printerf 5.9 DA608 instruction manual
Paper Size You may select any of the following format sizes:
Format Meaning P/E/ Size in inches Size in mm
Cd
*
Width x length
**
Width x length **
off No format size -- -- --
EXEC Executive P 71/4 x 101/2 184 x 267
LETT Letter P 81/2 x 11 216 x 279
LEGA Legal P 81/2 x 14 216 x 356
A4 DIN A4 P 81/4 x 1111/16 210 x 297
A5 DIN A5 P 513/16 x 81/4 148 x 210
MONA Monarch K 37/8 x 71/2 98 x 190,5
C10 Com-10 (Business) K 41/8 x 91/2 105 x 241
INTD International DL K 411/32 x 821/32 110 x 220
C5 International C5 K 63/8 x 91/64 162 x 229
INSD Inserter DL K 41/2 x 91/64 114 x 229
C6 International C6 K 41/2 x 63/8 114 x 162
A6 DIN A6 P 41/8 x 513/16 105 x 148
CRD1 Card 1 Kt 4 x 6 102 x 152
CRD2 Card 2 Kt 5 x 8 127 x 203
HAGA Hagaki K 315/16 x 513/16 100 x 148
B5 K 615/16 x 927/32 176 x 250
USER The format length
can be entered in P min. 70 x 75
mm max. 435 x 999
When you select a specific format size, the top margin value is
identical for the address block directions "Nor" and "Rev" (Cf. Sec.3 -
Top Margin).
If you select the setting "off", i.e. no format size, then the DA608
recognizes the top margin value in the address block direction "Rev"
only as the spacing from the paper feed edge to the first printed line,
or in this case the last page line (Cf. Sec.3 - Top Margin).
Character Set
National character sets with their own special characters in each
language (see character sets in the Annex).
Print Mode You may choose between three print modes:
bidirectional: Prints from left to right, then from right to left (fastest print
mode).
unidirectional: Prints only from left to right, except for Hex-Dump and
HEAD test. (This is a slow and accurate print mode.)
automatic: Bidirectional printing for text and unidirectional for
graphics.
*
P = Paper / E= Envelope / Cd = Card
**
The values in bold print represent the lengths in the transport directions