Instruction manual

Printer functions
\text\etd\DA608\printerf 5.8 DA608 instruction manual
Other Barcodes
If you acknowledge the barcode "ean" with the ENTER key, then you
will be offered only the parameter setting "BARCODE HEIGHT" -
as
already described.
Char. Spacing
You can change the character spacing from 0 to 90 dots by inserting
additional blanks.
Char. Height You can increase the character height up to sixteen tim
es without
changing the width.
Char. Width
You can increase the character width up to six times without changing
the height.
Line Spacing
You can change the spacing between the lines from 1 to 10 lines per
inch.
Orientation The address block may be rotated by 180°.
In "Nor" mode, printing is from top to bottom.
In "Rev" mode, printing is from bottom to top.
In “REV“ mode, the image memory capacity for an address is limited
to 60 lines each of 90 characters.