Instruction manual

Addressing paper
\text\etd\DA608\addressing 3.6 DA608 instruction manual
Setting print
position
Before inserting your document, you must decide how you wish to
position the address onto it, and how you can set this position in the
printing area.
Address block
rotation
The direction of printing depends on the size of your document and
on the left margin.
If the format is wider than the printing area and the print-head
cannot reach the required left margin, then the address block must
be rotated by 180° together with its left margin.
In “REV” mode, the image memory capacity for an address is
limited to 60 lines each of 90 characters.
“NOR” “REV”
print position
area
left
margin
top
margin
left margin
top margin
print position
area
Left Margin
The left margin is the spacing between the print area edge and the
first printed character.
The default setting for the margin is 10 mm.
– If you wish to set a different value, you may select a margin of 0-
220 mm in the "Left Margin" menu in programming mode (see
Sect. 5).