Instruction manual

Addressing paper
\text\etd\DA608\addressing 3.4 DA608 instruction manual
Horizontal bar
adjustment
– Use the second bar (5) for additionally securing wide and loose
documents.
– Loosen the fixing screw (a) to align the two bars (5) more or less
in the middle.
4
3
=
=
a
5
=
Vertical bar
adjustment
– Place the first sheet of paper (3) on the bar between the
stripping blade (b) and the guide block (4).
– Slide the guide block (4) up to the upper edge of the paper.
– Fan the paper out in the way shown in the diagram below.
– Tilt the bar.
– The optimal tilting depends on the paper length in the print
direction and on the thickness of the material:
Short paper = steep tilting
Long paper = flat tilting
– Secure the bar in place again with the screw (a).