Instruction manual

Addressing paper
\text\etd\DA608\addressing 3.2 DA608 instruction manual
Feeding paper
– Turn each of th
e two knurled knobs (9)
about half a turn away from the stop
towards the mid-
position (see figure on
right).
–
Unlock the knurled knob (10), lift it up and
lock it again in its raised position (see
arrow).
1.
2.
3.
99 10
– Place the first piece of paper (3) between the raised stripping
blades and the feed roller (see arrow).
9 10
– After unlocking the knurled knob (10), let the stripping blades
drop down onto the paper. As soon as the knurled knob is
locked again, the stripping blades are fixed at the correct height.
3.
1.
2.
99 10
– If the paper becomes skewed as it is pulled in, make fine
adjustments via the knurled knobs (9).