Instruction manual

Operation
\text\etd\DA608\operation 2.7 DA608 instruction manual
" " key
The printout starts one line away from the edge of the
paper.
" " key
The printout starts one line closer to the edge of the paper.
key
This key allows you to print out the last (up to 20) addresses
repeatedly.
key
This key allows you to measure the paper length.
"START"+"PAP" keys
By pressing these two keys simultaneously, you can reset
the address counter from its currently displayed value to "0".
"PAP"+"TEST" keys
By pressing these two keys simultaneously, you can
reset
the test address counter from its currently displayed value to
"0”.
When are the keys
active?
With the exception of the "START" key, the keys are active
only in the off-line operating mode.
The "START" key allows you to switch between on-line and
off-line operating modes. To check the current operating
mode, simply look at the display.
Off-line mode
The second line of the display reads "Off".
100% Cour12 000000
Off Exec Set1U Nor
In this mode you can change the settings via the keyboard.
By pressing the "START" key, you get back on-line.
On-line mode
The second line of the display reads "On".
100% Cour12 000000
On Exec Set1U Nor
In this mode you can start the printer from your computer
via instruction sequences.