Instruction manual

Operation
\text\etd\DA608\operation 2.6 DA608 instruction manual
What do the keys mean ?
end
next
prev
enter
start pap test prog
+
The four middle keys have a dual meaning, depending on the
operating mode!
"START" key The "START" key is used to switch between on-line and off
-
line modes .
"PAP" key The "PAP" key
draws in a document, or ejects an already
drawn-in document.
"TEST" key The "TEST
" key draws in one document, prints a test
address onto it and ejects it.
If you press the “Test” key down for longer than one second,
then test addresses will be printed out continuously.
"PROG" key The "PROG" key gets you into programming mode.