Instruction manual

Operation
\text\etd\DA608\operation 2.3 DA608 instruction manual
Connecting the printer
Power cable
CAUTION !
The DA608 is an instrument of
Protection Class 1
The printer must be operated only from grounded power sources!
Plug the power cable into the right-hand side of the printer (6a).
Printers no. 1 - 143
DISC ON NECT PO WER BEFOR E R EPLAC IN G F USES
100V 120V 220V 240V
USE ON LY W ITH
250V FUSE S
12a
12b
6
Printers from no. 201
12a
12b
6a
6b
Changing fuses
from printer no. 201
When changing fuses, disconnect the power cable !
Open the holder compartment with your fingertips or a ball-point pen.
Change the fuse as shown below.
The rated fuse values are shown in the Section “Technical Data“.
Interface cable
Plug the interface cable into terminal (12a) on the right-hand panel of
the printer for a parallel interface connection or into terminal (12b) for a
serial interface connection. Then lock it and connect the cable to your
PC.
12a 12b