Instruction manual

Operation
\text\etd\DA608\operation 2.2 DA608 instruction manual
CAUTION !
If the voltage has been changed, the fuses must also
be changed! (Rated fuse values are given on the type
plate.)
Changing fuses
for printers no.1 - 143
Changing between US and European fuses
– Open the (housing) lid (a) as described on the preceding page.
– Unscrew the recessed-head screw (e) by one turn.
– First push the fuse holder (f) back horizontally and then lift it out.
US fuse (1 fuse (d) !)
a
e
d (6,3x32mm)
f
European fuse (2 fuses (d) !)
a
d (5x20mm)
f
e
– Place the fuse holder (f) with fuse(s) onto the lid as shown in the
diagrams.
– Tighten the recessed-head screw (e) and replace the whole block
in the housing.
– The fuses inserted first into the housing are active.