Instruction manual

Important Notes on Safety
PLEASE READ THESE INSTRUCTIONS CAREFULLY
KEEP THEM WITHIN EASY REACH FOR LATER USE
All direction and warning labels on the conveyor must be observed.
Setting up the
conveyor
• When setting up the conveyor, be sure that it is positioned securely
and is level. If it is allowed to tilt, roll away or drop, injuries may
result.
• The conveyor must be protected from moisture.
Electrical
safety
• When connecting the conveyor to the power supply, observe the rated
values for the power connection on the name plate.
• Check the voltage setting on the conveyor’s power input module.
• For reasons of electrical safety, the power connection socket must be
equipped with a grounded conductor contact.
• The conveyor has double-pole fuse protection! In the event of fuse
failure, electrical parts in the conveyor may still be live.
• Run the power supply cable so that no-one can trip over it. Also
make sure that nothing is placed on the cable.
• If the conveyor remains unused over a long period of time,
disconnect it from the power supply. This ensures that no damage
will be caused by voltage surges.
• Never open the conveyor. For reasons of electrical safety, it may be
opened only by authorized service personnel.
Operational
safety
• Never touch the internal parts of the conveyor while it is running !
• To avoid damaging the coveyor, use only parts that have been
approved by the manufacturer.