Instruction manual

\text\tb356\setup 3.1 TB356 Instruction Manual
3. Setting up to the conveyor
Connecting the power
Power cable
Caution !
The TB-356 is a class 1 safety device
Use grounded circuits only!
Plug the power cable into (2)
Setting up the transport wheels
The TB-356 comes with a holding bar that has a magnetic base. The bar is designed
to hold the three transport wheels (9) that are supplied. The wheels set up the printed
material to drop into the stacking tray in a neat stack. Each roller is held in place by
red securing clips (d) placed one on either side of the wheel. For proper operation the
wheels must be positioned on a transport belt (1) resting on the exit/drive roller (e).