Instruction manual

Power connection
\text\da590\power N.2 Power input module
WARNING !
After changing the voltage, the fuses must also be changed ! (Fuse values can
be read off the letterplate.)
Changing fuses
- Open the (housing) lid as described on the preceding page.
- Screw the recessed head screw (e) out, by one turn.
- First push the fuse mount (f) out horizontally and then lift it out.
European fuses [2 fuses (d)]
US fuse [1 fuse (d)]
-
For a US fuse turn the fuse mount (f) upside down.
- Place the fuse mount (f) with the fuse(s) (d) onto the lid as shown in the
diagram.
- Secure the recessed head screw (e) and replace the entire block in the
housing.
- The fuse(s) is active.