Instruction manual

Assembly
\text\tb356\assembly 2.2 TB356 Instruction Manual
Adjusting for
the material
length
Loosen the knurled thumb screw (8). Take a piece of the
material being stacked and place it between the back stop plate
and the hanging plate. Move the back stop plate (6) in the
direction of the arrows until the material has about
1
/
4
” of play.
Lock the knurled thumb screw (8).
Positioning the
conveyor in-line
The conveyor should be positioned as close as possible to the
machine that it is in-line with. Be careful not to set the conveyor
so close that it actually touches the other machine. Make sure
that the belts are moving freely. The conveyor should be very
quiet.