Use and Care Guide

User Codes: User codes (or PIN codes) are used to
unlock the door and are created using the web or
mobile app. Code access can be limited by applying an
access schedule (M-F, 9-5) if desired. User codes must
be 4-10 digits.
Auto-Lock: When disabled, the lock will remain
unlocked after a code is entered. This mode is enabled
by default on all OpenEdge RG Lever models. When
Auto-Lock is enabled, the lock will automatically lock
itself after the specified delay. A delay of 5 seconds is set
by default.
Restore Factory Defaults: Factory settings can be
restored by pressing and holding the “R” button on the