Use and Care Guide

Specs and Functions
Power: 6V, four AA (1.5V) Alkaline or Lithium batteries
only. Low Power or Low Battery life Notifications are
initially sent when the device reports battery at 30% or
less. Once the battery has reached 30%, we will send
additional low power notifications once per week until
the device is dead.
Programming Code: The default programming code is
123456. Please change this code for your security.
Programming codes must be 4-10 digits.
Local Codes: Local codes are created using the
programming code at the lock. There is a limit of 10 local
codes. By default the code is 1234. Local codes must
be 4–10 digits.