User's Manual

INSTALLATION

MOUNTING THE ZXT-300 TO A WALL

MOUNTING LOCATION PRECAUTIONS

• Before mounting, check the material and structure of the mounting

location. If the location does not have the proper material or

structure, the ZXT-300 can fall and cause an injury.

• Use commercial items that best match the wall structure and

material for the screws and other fixtures.

• Do not mount near a kitchen counter, humidifier, or other location

in which it can be exposed to smoke or steam. Doing so could

cause a fire or electrical shock.

• Do not mount in locations with high humidity or large amounts of

dust. Doing so could cause a fire or electrical shock.

• Do not mount to locations subject to high temperatures, high

humidity, or exposed to water. Doing so could cause a fire or

electrical shock.

• Do not mount to locations subject to large amounts of vibration,

large jolts, or large forces. These could cause an injury if the ZXT-

300 falls and breaks.

MOUNTING PROCEDURE PRECAUTIONS

• Do not modify parts or use the ZXT-300 in ways other than its

intended use. Doing so could cause the ZXT-300 to fall and result

in an injury.

• Be sure to fully check that there are no electrical wires or pipes

inside the wall before mounting.

• If any of the screws are loose, the ZXT-300 can fall and cause an

injury. Do not mount the ZXT-300 with the screws still loose.

• Check that the two screws mounted to the wall are fully inserted

into the key holes of the ZXT-300. Otherwise, the ZXT-300 can

fall and cause an injury.

• Do not mount the ZXT-300 so that it sticks out from the wall edge.

It could get hit by people’s bodies or objects and cause an injury.

• Remotec will not be liable for any accidents or injuries that occur

due to improper mounting or handling.

• When mounting, be careful not to get your fingers pinched or

injure your hands.

MOUNTING PROCEDURE

The ZXT-300 can be mounted to a wall or wooden racks using the two

key holes in the bottom case. The ZXT-300 can be oriented

horizontally or vertically. Mount in the best way for your installation

conditions.

Note 1: The reception sensitivity varies depending on the antenna

direction. Find the direction providing the best reception by

adjusting the antenna direction before mounting the ZXT-300.