User's Manual

24
Check FLiRS / Always Listening Mode
Step
Procedure / Description LED indication
1
In the System Main (SYS) screen:
Press > to navigate to the Operation Mode (Mod)
screen. Press + or – to entry the setting.
2
If the screen displayed “Batt, then the ZTS- 500US
will operate in FLiRS mode after inclusion into a
Z-Wave network.
If the screen displayed “24V”, then the ZTS- 500US
will operate in Always Listening mode after
inclusion into a Z-Wave network.
Press > or < to back to the previous screen.
Z-Wave Add (Include) / Remove (Exclude) into/from Z-Wave network
Add (Include) ZTS-500US to Gateway / Controller
Step
Procedure / Description LED indication
1
From the Standby screen, press > or < to navigate
to the Z-Wave screen and the Z-Wave LED will
continuously flash.
Tap + to include the ZTS-500US into the network.
2
There is a “z” animation during Z-Wave searching.
.
.