User's Manual
15
Note:
If the user performs a Reset to Factory Default Settings or Z-Wave Exclusion operation, the
ZTS-500US will retain the last selected HVAC system type.
Thermostat Mode and Set point
For normal setup and operations, ZTS-500US will take the action after key released and it will go
back to standby menu after 3 seconds.
Step Procedure / Description LED indication
1
From the Standby screen, press > to navigate to
the Mode screen and the Mode LED will keep
flashing.
Press + or - to scroll to your HVAC mode
(Off/Heat/Cool/Auto).
2
From the Standby screen, press + or - to set your
desired temperature set point.
Remark:
- Heat or Cool icons with white colour will be
turned on when adjusting the heat or cool set
point.
- Heat icon with red colour will be turned on
once heater is active.
- Cool icon with blue colour will be turned on
once compressor is active.