User's Manual

13
LCD indicationStep Procedure / Description
Press "Prog" key once to confirm the setting
and it will go to minutes setting.
Minutes will keep flashing, press Up/Down
key to set minutes.
4
Press "Prog" key once to confirm the setting
and it will go to 12/24 hour clock selection.
Press Up/Down key to toggle the 12/24
hour clock selection.
5
Press "Prog" key once to confirm the setting
and it will go to temperature F (Fahrenheit)
-> C (Celsius) selection.
Press Up/Down key to toggle the
temperature F (Fahrenheit) -> C (Celsius)
selection.
6
Press "Prog" key once to confirm the setting
and it will go to swing setting.
Press Up/Down key to set the swing setting.
oooo
(Range is from 0.5 C to 2 C or 1 F to 4 F )
7
AM
MO
AM
PM
HR
SWING
14
Note: Explanations of Swing and Differential set point
HEAT mode: thermostat controls the temperature according to the following
diagram
o o o
Example for Heating: (Set point = 70 F, Swing = 1 F, Differential = 2 F)
o o
=> 1st stage heater turns on when room temp is 69 F and off at 71 F.
o o
=> 2nd stage heater turns on when room temp is 67 F and off at 70 F.
LCD indicationStep Procedure / Description
Press "Prog" key once to confirm the setting
and it will go to differential set point setting.
Press Up/Down key to set the differential set
oo
point setting. (Range is from 0.5 C to 2 C or
oo
1 F to 4 F )
8
MO
DIFF
Press "Prog" key once to confirm the setting
and it will go to Advanced Recovery setting.
Press Up/Down key to enable/disable
Advanced Recovery Mode.
9
Press "Prog" key once to confirm the setting
and it will go to the Home page.
10
RECOVERY
RECOVERY
WAKE
AM
MO
FAN AUTO
PROG ON
OFF
Diff Swing
SD= switch differential
Swing
Temperature
Output
Off
Heat
st
1 Turn off
nd
2 Turn off
Set point
st
1 Turn on
nd
2 Turn on