Product guide

01359 270280 | www.invisionuk.com | WORLD-CLASS BRANDS | EX-STOCK AVAILABILITY | NATIONWIDE DISTRIBUTION
36 | The UK’s leading home technology distributor
CONNECTING BLOCKS
XANTECH CONNECTING BLOCKS
One-zone, Four-source - 78944
Ǧ Connects four emitter to all Xantech IR receivers
Ǧ Status terminal for connection of receivers that have status LEDs
Ǧ 2.1mm coaxial power jack
Ǧ Requires PSU (sold separately)
Ǧ Dimension : 77mm x 45mm x 21mm
One-zone, Ten-source - 79144
Ǧ Parallel emitter ports drive 10 single or dual emitters
Ǧ High-speed opto-isolator for improved operation
Ǧ Emitter port jumpers permit high or low power IR output
Ǧ Contains red LED input signal test-IR
Ǧ Requires PSU (sold separately)
Ǧ Dimension : 153mm x 58mm x 24mm
One-zone, Two-source - 79520
Ǧ Connects two emitters to all Xantech IR receivers
Ǧ 2x 3.5mm mono mini jacks to drive single or dual emitters
Ǧ 2.1mm coaxial power jack
Ǧ Requires PSU (sold separately)
Ǧ Dimension : 54mm x 32mm x 19mm
One-zone, Six-source - 79620
Ǧ Connects six emitters to all Xantech IR receivers
Ǧ 6x 3.5mm mono mini jacks to drive single or dual emitters
Ǧ Contains 100 Ohm resistor per emitter port
Ǧ Requires PSU (sold separately)
One-zone, One-source - CB12
Ǧ Connects an emitter to all Xantech IR receivers
Ǧ Includes a 3-terminal block for wired connections of IR receivers
Ǧ 2.1mm coaxial power jack
Ǧ Requires PSU (sold separately)
Ǧ Dimension : 54mm x 32mm x 19mm
Two-zone connecting block - CB20
Ǧ One plug-in screw connector for each zone’s IR receiver
Ǧ 3.5mm momo mini jack for zone and IR emitters
Ǧ Can be used with 79144 for emitter expansion
Ǧ Requires PSU (sold separately)
Ǧ Dimension : 77mm x 45mm x 21mm