Installation guide

5
T1-B
The T1-B can be completely customized to control
virtually any aspect of the home or office. Buttons
can be individually programmed to control devices or
execute multi-step macros for complex installations
involving many components. Source buttons can be
custom labeled to match the device being controlled
for more intuitive control. The integrated tilt switch,
coupled with a Lithium-ion battery and charging dock
insure hours of uninterrupted control.
When other RTI devices are employed, the T1-B
is capable of RF transmission thru walls and
cabinets, RS-232 control, contact closures, power
sensing and much more. Whether used as a
standalone device or integrated into a complete
RTI control solution, the T1-B will provide
powerful and intuitive control of any electronics
system - from simple to sophisticated.
Part #: 10-210210-07
• Comfortable ergonomic design permits effortless, one-handed
operation.
• Eight source and four general purpose assignable/programmable
keypad buttons with interchangeable key caps.
• Forty assignable/programmable keypad buttons.
• Capable of transmitting IR and RF.
• Completely customizable and programmable.
• Optional modules/processors for voltage sensing (to monitor power
status of equipment) and RS-232 control.
• System includes a Lithium-Ion Battery and a docking station.
• USB Programming.
NOTE: A 433MHz antenna must be used with this model of remote.
It is not compatible with the ZM-24 2.4 GHz transceiver module.
Key Features
Specifications
Power ......................................... 3.6 VDC, 850 mAh Lithium-Ion Battery Pack
Power Management ............................................ Automatic On/Off (tilt switch)
Infrared Control Range ..............................30 feet (9.1 meters) @ 60 degrees
Infrared Frequency Transmission Range ................................15kHz - 460kHz
Radio Frequency Control Range .........................Up to 100 feet (30.5 meters)
..................................................(With optional System Interfaces/Processors)
Radio Frequency Carrier ................................................................... 433 MHz
Operating Temperature ................................. +32°F to +122°F (0°C to +50°C)
Operating Humidity .............................................. 5% to 95% Non-condensing
Nominal Run Time on Full Charge .............3 hours minimum, continuous use
................................................................................... (7 days on average use)
Standby Time on Full Charge ............................................................. 30 Days
Battery Charge Time ........................................................................3-4 Hours
Total System Memory .......................256K Bytes Flash (non-volatile) memory
Device Capability .............. Total number of devices is limited only by memory
Macro Capability .......................................... Unlimited steps in a single macro
...........................................Total number of macros is limited only by memory
......................................................................Macro capability on every button
Communications ..........................................................USB programming port
Dimensions (L x W x D) ....... 10.0 in (254mm) x 1.9 in (48mm) x .9 in (23mm)
Enclosure ...................................................... High-impact molded ABS plastic
Weight ...............................................................7 oz. (200g) with battery pack
Warranty ............................ One Year (Parts & Labor) / 90 days on the battery
Handheld System Controllers
Now available
in an RF kit!
(See the Kits section for details)