Installation guide

ManualsBrandsRemote Technologies ManualsRemote ControlsT2-Cs+

Accessories

ZB-PRO

The ZB-Pro is a Professional Network Management Tool

for use with Remote Technologies Inc. 2.4 GHz Zigbee

networks. It operates in different modes, which are

programmed automatically by the speciﬁc Integration

Designer

function begin used. The ZB-Pro is attached

to a standard USB port of a PC and is used for purposes,

such as downloading programming and ﬁrmware updates

into a RTI ZM-24 Transceiver Modules.

Part #: 10-210216-13

• Downloads network conguration data into an RTI ZM-24

Transceiver Module.

• Updates the rmware in the RTI ZM-24 Transceiver Module.

• No external power supply is required. Power is derived directly from

the USB port.

• Feedback LEDs conrm various operations.

• Compact, rugged design.

• Available only to professional systems integrators.

• Two year parts and labor warranty.

Key Features

Specifications

Power Requirements .................................... Powered directly from USB port

RF Carrier Frequency ....................................... 2.4GHz (Zigbee

technology)

Standards ................................................................................ IEEE 802.15.4

Operating Temperature ......................................................... +32°F to +122°F

..................................................................................................(0°C to +50°C)

Operating Humidity .............................................. 5% to 95% non-condensing

Dimensions (HxWxD) ........ 4.28in (109mm) x 1.37in (35mm) x .65in (17mm)

Weight ................................................................................ 1.1 oz. (32 grams)

Professional

2.4GHz Network

Management Tool

Key Features

The ZM-24 2.4GHz Transceiver Module is capable of

more than just receiving signals - it can transmit signals

as well. This creates a bi-directional communication link

between certain RTI control processors and handheld

remote controls. The ZM-24 is easy to install, since

only one module needs to be hard-wired to the control

processor, while additional “repeater” modules can

be added by powering them from any electrical outlet

within communication range of other modules. The

ZM-24 units will then create a self-healing “mesh”

network which adapts to changes or problems with the

communication path.

Part #: 10-210178-20

• Enables bi-directional wireless communication.

• Wireless communication range between ZM-24 modules up to 100 feet.

• Connects to a central processor from up to 1000 feet away using

standard Cat-5 cable.

• Can be used in “coordinator” mode, or create a self-healing mesh

network by adding modules congured in “repeater” mode.

• Utilizes IEEE802.15.4 wireless Zigbee

communication at 2.4Ghz.

• Easy mounting with adjustable antenna and detachable wall bracket.

• Receives power from an RTI control processor or the included power

supply. or CB8 connecting block

NOTE: A 2.4 GHz Zigbee

enabled remote control and processor must

be used with this model transceiver. It is not compatible with the

433MHz remote controls.

Specifications

Power ......................................................................+9VDC to +16VDC, 60mA

RTI Com Port ......... Two-way Zigbee

Communication Port, RJ45 Connection

................................................................. Drives up to 1000 ft (300 m) of wire

Wireless Networking ....................... IEEE802.15.4 Zigbee

network compliant

RF Frequency Range ............................................................ 2.4Ghz - 2.5Ghz

Operating Temperature ................................. +32°F to +122°F (0°C to +50°C)

Operating Humidity .............................................. 5% to 95% Non-condensing

Device Capability .............. Total number of devices is limited only by memory

Communications ......................................... OTA (Over-the-air) Programmable

Enclosure ............................................High-impact molded ABS plastic, black

Mounting ............................................................................ Detachable bracket

Dimensions -Ant. Flat (WxHxD) .... 3.5” (89mm) x 4.0” (101mm) x 1.1” (28mm)

Dimensions -Ant. Ext. (WxHxD) . 3.5” (89mm) x 7.25” (184mm) x 1.1” (28mm)

Weight ........................................................................................... 4 oz (113g)

Warranty ...................................................................One Year (Parts & Labor)

ZM-24

2.4GHz Transceiver

Module