Installation guide

45
Accessories
VPS-1
The VPS-1 Voltage Power Sensor monitors the on and off
status of almost any electronic component and provides
this power status information to RTI control systems such
as the XP-6 Remote Control Processor. When the attached
component is powered on, the VPS-1 detects the voltage
supplied from the component, an attached power supply, or
a third-party power sensor, and sends a signal to the RTI
control system.
Part #: 10-210013-08
Key Features
Voltage Sensor
Module
• Connects to the output ports of the RP-6, ZRP-6, XP-3, XP-6 or
XP-8 control processors, or the PCM-8 Control Port Module
• Detects the on/off status of almost any component.
• No power supply required - Power is supplied by the output ports.
• Power sensing circuit is housed in a compact, rugged ABS
enclosure.
• LED light indicates the current power status.
• Control cable can be extended up to 500 feet.
Specifications
Output ..................................... Compatible with industry standard IR emitters
IR Output Drive .................................................................... 100mA maximum
Input Requirements ............. 3V to 24VDC -or- 9V to 30V P-P AC (50Hz min)
Maximum Current Consumption ........................................................... 0.5mA
Control Cable Length ............................................................... 12 feet (3.7 m)
Voltage Sensor Cable Length ...................................................... 3 feet (.9 m)
Dimensions (W x H x D) .............. 1.75” (44mm) x 3.0” (76mm) x 0.7” (18mm)
Warranty .................................................................. One Year (Parts & Labor)
vIRsa Mouse
Designed with the professional integrator in mind,
the “versatile” vIRsa Mouse is an IR emitter built to
outperform all others. If is loaded with features to make
installations go smoother, such as an unobtrusive, low-
profile design, a flexible film adhesive and a separate
holder that allows easy removal/replacement of the emitter.
Since reliability is of utmost importance, the vIRsa Mouse
is engineered with an actual (translucent) PCB to improve
the integrity of electrical connections, a built-in resistor
protects against over-driving and precision molding
ensures consistent quality.
Part #: 10-210268-20
• Sleek, low-prole and symmetrical design.
• Separate holder allows for easy removal and replacement of
emitter.
• Includes two emitter holders (one red, one clear).
• Blue LED asher can be visible during normal operation or only
for troubleshooting.
• Ten foot cable reaches the entire rack.
• Flexible lm adhesive conforms to curved surfaces.
• Translucent circuit board.
• Industry standard 3.5mm mini-plug uses precision over-molding
to ensure consistency.
• Includes cable management strap.
Key Features
Specifications
Output ...................... Compatible with industry standard IR repeater systems
Infrared Power Requirements ................................. 12VDC, 100mA maximum
Maximum Current Consumption ............................................................ 30mA
Cable Length ........................................................................... 10 feet (3.0 m)
Plug type ................................................................................................3.5mm
Dimensions (W x H x D) ................... .4” (10mm) x .5” (13mm) x 0.1” (2.5mm)
Warranty ............................................................................................. 90 days
IR Emitter